How to effectively use the services of the operator?
Our own infrastructure gives us full possibilities and freedom in launching services. Unfortunately, we can not always use our own fiber optics.
How to effectively use the services of the operator?
When we do not have fiber brought to a specific location, we must use the services of an operator. There are three main services to consider from the operator: Alien lambda, Alien OTN, Fiber lease.For each of these services, we can use the appropriate device or a suitable transmission system that will allow efficient use of the available bandwidth.
What problems and challenges are associated with the selection of the right service from the operator?
- high cost of fiber lease
- high bandwidth requirement
- lack of compatibility of devices from different vendors
- a large number of services provided with different bandwidths and protocols
What solution do we have?
One of the services available from operators is Alien OTN. The operator provides us with a port on the transponder or muxponder device to which we connect our device supporting OTU frames. Using our own device we aggregate services such as Fibre Channel and Ethernet to a single interface that broadcasts in the OTN standard.
In this way, after the infrastructure of the operator, we transfer our own services without entering higher layers, so that our services are not interfered with by devices such as routers and switches.
- Alien lambda
The Alien Lambda service allows you to purchase a single port on a passive device, which is a multiplexer. On this channel you have the freedom to upload your services, regardless of their type.
With the Alien Lambda service, you can maximize the efficiency of your bandwidth utilization. With muksponders, you aggregate a variety of low-bandwidth services — such as 10Gb, 40Gb, 100Gb Ethernet or 8G, 16G, 32G Fibre Channel — into a single interface.
This service not only increases network bandwidth, but also gives you flexibility in choosing the services and protocols you want to transmit.
- Fibre lease
The lease of optical fiber allows freedom in terms of the number and type of services that we can run. We can use a single fiber to run a single transmission using BiDi modules (and. Bidirectional) or create an advanced transmission system on it.
The latter option allows you to transfer multiple services simultaneously, with a variety of bandwidths and using different protocols.
What are the benefits of transmission systems?
- Better use of infrastructure
Is there a lack of fiber or does the lease of another generate too much cost? The transmission system limits the number of fibers to a single pair. You don't have to worry about the cost of the lease. Now your priority will be to increase the number of services and expand the network, not to fight for additional fibers.
- Saves space and resources
A single optical fiber used by a transmission system can replace many traditional fibers. This saves space and reduces infrastructure costs.
- Scalability and Flexibility
xWDM provides the scalability of your data center network infrastructure. Thanks to the possibility of adding additional channels, without the need for physical expansion, this system allows flexible adaptation to the growing needs of data transmission.
- Installation simpler than it seems
The installation of the multiplication system is reduced to the connection of elements with patchwork cords. The whole process is very fast and error-proof. You can start a passive CWDM system in literally a few hours.
- Installation simpler than it seems
The installation of the multiplication system is reduced to the connection of elements with patchwork cords. The whole process is very fast and error-proof. You can start a passive CWDM system in literally a few hours.
- Absence of formalities
In case of expansion of the transmission system, you skip the formalities related to reporting to the UKE or preparation of the executive project.
- Security
Transmission systems make it possible to secure services on many levels. The first is to protect services against physical damage to the system, e.g. against cable damage or loss of one of the power sources. At this level, we achieve this by applying a backup route or full hardware redundancy. The second level is to directly protect the transmission from unauthorized access with layer one encryption.
- Ethernet and Fibre Channel in one fiber
If you have Ethernet services running on your network, Fibre Channel with different bandwidths, you can also use a transmission system. Systems such as CWDM and DWDM support virtually the entire range of protocols. Most interestingly, they can work in the same optical fiber.
Not sure where to start? Set your goal and we will show you how to achieve it.
Leave the layer first for us!
- Creating a data center transmission system — where do we start?
We know that every company or institution is different, so we offer solutions tailored to individual needs. We start each project with a free consultation, during which we will ask you what your network looks like, what goal you want to achieve and what you plan for the future. After a 20-minute conversation, we will be able to determine what technology to use and present some of the best solutions.
The next stage is measurements. If during the consultation, we notice that for the correct operation of the system it is necessary to check the optical fiber track, then we will tell you how to do it.
Don't have the right tools? It doesn't hurt. We'll check it out for you
- Can I rent equipment for tests?
We want you to be 100% sure that the investment in the transmission system will meet your expectations. After the consultation stage and deciding which of the presented concepts will be right for you, we have two options to check it in action. The first is to reproduce a fragment of your network with us in the laboratory, where we can present the operation of the system, and the second is testing with you in a production environment.
- How long does it take to implement a transmission system? Who makes them?
Most solutions for connections between locations rely on passive devices that do not require power or configuration. The system is strapped by patchcords. This eliminates the need for fiber welding. That is why the installation is simple and fast enough that customers decide to start on their own. If the system requires the involvement of a specialized engineer, then Salumanus ensures the implementation, configuration and commissioning of all designed services. Depending on the size of the implementation, it usually takes 1-2 working days.
- How much does a data center transmission system cost?
To answer this question, we need to clarify what can make up the price of a transmission system. The determination of the solution technology, the selection of devices or the creation of a connection diagram is free of charge as part of the consultation.
The costs are:
- optical modules
- passive-patchcord devices
Optional:
- measurements
- implementation
As you can see, there are many constituent parts of the final amount. Here we will not give you the cost of implementation directly, but we can use some comparison. According to T-Mobile estimates, the average cost of downtime caused by an IT outage is about $88,000 per hour. (Source: https://testerzy.pl/baza-wiedzy/artykuly/ile-kosztuje-awaria-w-it)
Undertaking the implementation of a transmission system that:
- will guarantee you safety
- reduce the costs associated with the traditional construction of a fiber optic tract
- will reduce the cost of expansion with subsequent transmissions only to the purchase of modules
- Enabling more efficient use of available infrastructure
- will allow possible encryption of the transmission in layer one
You will invest about ¼ of the costs that a failure would consume. Estimate the transmission system for your needs.
Want to know the price of your system for fiber optic network? Let's talk about the amount of investment to expand the network with new connections.
By Salumanus you will gain
- Cost Optimization
- Faster adaptation of new technologies
- Energy efficiency
- Save space in the server room
- Decrease in stock
Our realizations
How to ensure the security of transmission in urban fiber networks? Part 1.
Poland
make
Tests
try&buy
Support at every stage of the project
Author's
solutions
Own fiber optic laboratory
Doradca Salumanus
Skontaktuj się z nami już dzisiaj, aby dowiedzieć się, jakie możliwości otwierają przed Tobą nasze technologie.
Marcin Bednarski
Business Development Manager
marcin.bednarski@salumanus.com